Please read PRECAUTIONS, this User’s Manual and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please read the Setup Guide (separate volume) • The latest User’s Manual is available for download from our site: http://www.eizo.com...
Page 2
VESA is a registered trademark or a trademark of the Video Electronics Standards Association in the United States and other countries. PowerManager and UniColor Pro are trademarks of EIZO NANAO CORPORATION. EIZO, EIZO Logo, FlexScan, i•Sound and ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.
Use optional products manufactured or specified by us with this product. As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more after the monitor power has been turned on.
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the environmental conditions. • Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
- Power Consumption when main power switch is Off: 0W Equipped with main power switch. Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used. - Auto EcoView function The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably.
Connects the USB cable to use the software that needs USB connection, or to use USB Hub USB port (Down) Connects a peripheral USB device. Stand Used to adjust the height and angle of the monitor screen. Security lock slot Complies with Kensington’s MicroSaver security system. Cable holder Covers the monitor cables.
1-3. Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme.
1-4. Basic Operation and Functions Basic operation of Adjustment menu Displaying Adjustment Menu Press The adjustment menu appears. Menu title Menu Adjusting/Setting 1. Choose a menu to adjust/set with 2. Choose an item to adjust/set with 3. Adjust/set the selected item with Exiting Press a few times.
Showing Button Guide Press the front buttons (except monitor with "Portrait" position, the button guide appears next to the button.) NOTE • The button guide will continue to appear while the Adjustment menu or Mode menu is showing. • The button guide is displayed differently depending on the selected menu or status.
Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ● Windows 7 1. Right-click the mouse anywhere on the desktop except for icons.
PC to be used. The Self Adjust function works when all of the following conditions are satisfied. • When a signal is input into the monitor for the first time or when the resolution or Vertical/ Horizontal Frequency not displayed before is set •...
Page 15
Prepare the display pattern for the analog display adjustment. Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”. NOTE • For details and instructions on opening the “Screen adjustment pattern files”, refer to the “Readme.txt” file.
Page 16
To correct screen position [Hor.Position] [Ver.Position] NOTE • Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display images correctly. The position adjustment is made to shift an image to the correct position.
Page 17
Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”. 2. Choose <Range Adjustment> from the <Analog Adjustment> menu, and press The color gradation is adjusted automatically.
• Perform the range adjustment first when adjusting color for analog input signals. (Refer to “To adjust color gradation automatically” on • The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. Make fine color adjustment visually when matching colors on multiple monitors.
NOTE • The values shown in “%” or “K” are available only as reference. • Using the “ScreenManager Pro for LCD” allows you to perform the color adjustment by using the mouse and keyboard of your PC. The adjusted status can be registered as a color data and restore the data later. (Refer to “Chapter 4 Color Adjustment”...
• [Gain] allows you to perform more advanced adjustment (See “To adjust the gain value” on • If you set to [Native], the image is displayed in the preset color of the monitor (Gain: 100% for each RGB). • When changing the gain value, the color temperature adjusting range is changed to “User”.
To adjust the gamma value [Gamma] The gamma value can be adjusted. The luminance of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the luminance of the monitor is called as “Gamma correction”.
● Enable/Disable Contrast Enhancer [Contrast Enhancer] This feature manages the brightness and gain levels of the backlight to match the image displayed while also improving the sense of contrast of images by correcting gamma values. Procedure 1. Choose <Color> from the Adjustment menu, and press 2.
● To adjust six colors [6 Colors] The hue and saturation can be adjusted for each of six colors: Magenta, Red, Yellow, Green, Cyan, and Blue. Adjustable range: -100 to 100 Procedure 1. Choose <Color> from the Adjustment menu, and press 2.
2-4. Displaying Lower Resolutions ● To change screen size [Screen Size] The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using <Screen Size> from <Screen> menu. Menu Full Displays an image in full screen.
5. Select “Finish” with 6. Press to exit. The Optional Settings menu is closed. , and press down for at least 2 seconds to turn on the monitor. , and press Buttons that can be locked button Chapter 3 Setting Monitor...
3-3. Setting the EIZO Logo Display [Logo] The EIZO logo appears on the display when turning on the monitor. This function allows you to display, or not, the EIZO logo. Procedure 1. Press to turn off the monitor. 2. Press holding The Optional Settings menu appears.
4. Select “On” or “Off” with 5. Select “Finish” with The Optional Settings menu is closed. NOTE • You can check the DDC/CI setting in the <Monitor Info> menu. down at least 2 seconds to turn on the monitor. , and press (page...
1. Choose <Tools> from the Adjustment menu, and press 2. Choose <All Reset> from the <Tools> menu, and press 3. Select “Execute” with 4. Press to exit the adjustment. All setting values revert to the default settings. Chapter 3 Setting Monitor page...
• Devices connected to the USB port (upstream and downstream) work when the monitor is in power saving mode or when the power button of the monitor is Off. Therefore, power consumption of the monitor varies with connected devices even in the power saving mode.
Auto EcoView function. Attention • Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function. Procedure 1. Choose <PowerManager> from the Adjustment menu, and press 2.
: Horizontal Frequency fV : Vertical Frequency • Adjust using [Brightness] or [Contrast]. (The LCD monitor backlight has a fixed life span. When the screen becomes dark or begins to flicker, contact your local dealer.) • Turn on the Auto EcoView function. The monitor detects the environmental brightness to adjust the screen brightness automatically.
Page 32
• This is due to LCD panel characteristics and is not a failure. • Leave the monitor with a white or black screen. The symptom may disappear. • When entering the signals of HDCP system, the normal images may not be displayed immediately.
Page 33
Problems 16. The monitor connected with the USB cable is not detected. / USB devices connected to the monitor does not work. Possible cause and remedy • Check whether the USB cable is connected correctly. (page • Change the USB port to another one. If the PC or peripheral devices works correctly by changing the USB port, contact your local dealer.
• Since the monitor and arm or stand are so heavy, dropping them may result in injury or equipment damage. • If you need to remove the SX2262W, turn the panel on the monitor to the left and right a little so that the four screws positioned under the stand are visible.
6-2. Connecting More than Two PCs to the Monitor More than two PCs can be connected to the monitor through the DVI-I and the DisplayPort connector on the back of the monitor. Connection examples DisplayPort connector ● To switch the input signal The input signal switches each time When the signal is switched, the active input port name appears at the top right corner of the screen.
● To set input signal selection [Input Selection] The monitor recognizes the connector through which PC signals are input. When a PC is turned off or enters the powersaving mode, the monitor automatically displays another signal. Setting Auto Manual Procedure 1.
3. EIZO USB cable (MD-C93) Attention • This monitor may not work depending on PC, OS or peripheral devices to be used. For USB compatibility of peripheral devices, contact their manufactures. • Devices connected to the USB port (upstream and downstream) work when the monitor is in power saving mode or when the power button of the monitor is Off.
2. Choose <Monitor Info> from the <Tools> menu, and press The Monitor Info screen appears. (Example) Attention • The usage time is not always “0” due to factory inspection when you purchase the monitor. Chapter 6 Reference reduction as a result of the emissions...
6-5. Specifications SX2262W LCD Panel Size Surface treatment Surface hardness Viewing angle Dot Pitch Response Time Horizontal Scan Analog Frequency Digital Vertical Scan Analog Frequency Digital Resolution Max. Dot Clock Analog Digital Max. Display Color Display Area (H × V) Power Supply Power Screen Display On...
Page 40
Environmental Temperature Conditions Humidity Pressure Standard Port Communication Speed Supply current SX2462W LCD Panel Size Surface treatment Surface hardness Viewing angle Dot Pitch Response Time Horizontal Scan Analog Frequency Digital Vertical Scan Analog Frequency Digital Resolution Max. Dot Clock Analog Digital Max.
Page 41
Dimensions Main unit Main unit (without stand) Mass Main unit Main unit (without stand) Movable range Tilt Swivel Adjustable height Rotation Environmental Temperature Conditions Humidity Pressure Standard Port Communication Speed Supply current Main default settings (factory settings) FineContrast Power Save Input Selection Screen Size Auto EcoView...
Accessories List Cleaning Kit Signal Cable Speaker Unit For the latest information about the accessories, refer to our web site. Chapter 6 Reference EIZO “ScreenCleaner” PP200 i•Sound L3 http://www.eizo.com...
DisplayPort VESA provides the digital interface standard for the digital display device. DisplayPort can transfer the video signal up to 16 bits for each channel of RGB, and the audio signal too. (This monitor supports the 8-bit video signal only.) DVI (Digital Visual Interface) DVI is a digital interface standard.
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200, all pixels are illuminated as a full screen (1:1).
6-7. Preset Timing The following table shows factory preset video timing (for analog signal only). Attention • Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu. • If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, screen display may still be incorrect even after the adjustment.
Applicable to SX2262W only. Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (Enclosed) This Class B digital apparatus complies with Canadian ICES-003.
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1920 × 1200, Digital Eingang und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)