HP Jetdirect 280m - 802.11b Wireless Print Server User Manual page 99

HP Jetdirect troubleshooting
Retry.
It appears that a dynamic IP address has not be successfully assigned to the
printer, or that you are using a network protocol other than IP.
If you are using the IP protocol, follow these steps:
1. Wait two minutes. Sometimes it takes a couple of minutes for dynamic IP
addresses to be assigned.
2. Print a new configuration page and check for a valid IP address.
3. If there is still no valid IP address for the printer, cycle the printer's power:
Switch off the printer.
Unplug the printer's power cord.
Plug the power cord back in again.
Switch on the printer.
4. Check that your network's DHCP or BOOTP server is functioning properly.
After following the above steps, does your printer now show a valid IP
address?
If yes, click the Yes button to continue with the troubleshooting procedure.
If no, you will need further assistance. Click No for details on how to contact HP
technical support.
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/280M/USER/LWTNET12.HTM [5/20/2003 3:57:20 PM]