HP Jetdirect 280m - 802.11b Wireless Print Server User Manual page 157

Table 9.6 TCP/IP Configuration Information (3 of 3)
Message
CONFIG FILE:
DOMAIN NAME:
DNS SERVER:
WINS SERVER:
SYSLOG SERVER:
IDLE TIMEOUT:
SLP:
WEB JETADMIN URL:
16 HP Jetdirect Configuration Page
Description
The name of the HP Jetdirect configuration file. The file
pathname may be truncated to fit on two lines.
NOT SPECIFIED indicates that a file was not specified in
the BOOTP reply from the host.
The Domain Name System (DNS) name of the domain in
which the HP Jetdirect print server resides (for example,
support.company.com). It is not the fully qualified DNS
name (for example, printer1.support.company.com)
because the host printer name is not included.
NOT SPECIFIED indicates that a domain name has not
been configured on the print server.
The IP address of the Domain Name System (DNS) server.
NOT SPECIFIED indicates that a DNS server's IP address
has not been configured on the print server.
The IP address of the Windows Internet Name Service
(WINS) server.
NOT SPECIFIED indicates that a WINS server's IP
address has not been configured on the print server.
The IP address of the syslog server configured on the
print server.
NOT SPECIFIED indicates that a syslog server has not
been configured.
The timeout value expressed in seconds after which the
print server closes an idle TCP print data connection.
Acceptable values are integers between 0 and 3600. A
value of zero turns off the timeout mechanism. The default
value is 270 seconds.
Specifies whether the HP Jetdirect print server sends
Service Location Protocol (SLP) packets used by system
applications for automated installation.
ENABLED: The print server sends SLP packets.
DISABLED: The print server does not send SLP packets.
If the HP Jetdirect print server is found on the network by
HP Web JetAdmin, the URL of the host system used for
HP Web JetAdmin services is displayed. The URL is
limited to two lines and may be truncated.
NOT SPECIFIED indicates that the URL of the Web
JetAdmin host system could not be identified or is
not configured.
ENWW