HP Jetdirect 280m - 802.11b Wireless Print Server User Manual page 71

HP Jetdirect 280m user's guide
1. Configure the wireless printer to communicate on your network.
You will use the HP Jetdirect Wireless Setup Wizard for this task. (This step
puts the printer on your wireless network. It is functionally equivalent to
plugging the network cable into a printer on a wired network.)
a. Choose a wireless computer from your wireless network.
During the configuration your computer will be communicating with
the wireless printer in ad hoc mode, which involves direct wireless
communication between the computer and the printer (without going
through a wireless access point).
b. Make a note of your computer's wireless settings. You will
configure these settings onto the wireless printer.
c. Insert the HP Jetdirect CD into the wireless computer's CD-
ROM drive. (If the CD does not automatically start, run SETUP.EXE
from your CD-ROM drive.)
You will use the Wireless Setup Wizard on this CD to:
d. Run the Wireless Setup Wizard. From the CD's opening screen:
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/280M/USER/LWINST.HTM (2 of 5) [5/20/2003 3:49:37 PM]
Mode (network type): Ad hoc (peer-to-peer) or Infrastructure
(using a wireless access point)
Network name (SSID)
Encryption and authentication settings
change the wireless settings on your computer to communicate
with the wireless printer
download the new network configuration to the printer
Click "Install".