HP Jetdirect 280m - 802.11b Wireless Print Server User Manual page 53

Network Basics
Connect the printer
cable (USB or
parallel, as
appropriate)
between the printer
and the print
server. Connect the
network cable to
the print server.
Switch on the
printer's power.
Plug in the print
server's power
cord. Push the Test
button on the print
server to print a
configuration page
on the printer; this
tests the
connection
between the print
server and the
printer. (For
detailed
instructions, check
your print server
manual or setup
poster.)
Note: For a
wireless print
server the
connection
sequence is the
same, except that
there is no network
cable to connect.
If you use an
internal print
server: Note that
many printers
come with the print
server module
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/NETBASIC/FIP0010.HTM (2 of 4) [5/20/2003 3:45:29 PM]