HP Jetdirect 280m - 802.11b Wireless Print Server User Manual page 91

HP Jetdirect troubleshooting
Fix errors.
Fix any errors for which solutions are apparent. The page on
configuration page
If you fix any errors, then cycle power on the printer, as follows:
Switch off the printer.
Unplug the printer's power cord.
Plug the power cord back in again.
Switch on the printer.
(This prodecure is recommended because many printers maintain power for fast
warm-up even when the power switch is switched off. Unplugging the power cord
ensures that power is removed from the printer.)
Did you make any changes?
If yes, click on the Yes button to go back to the beginning of the troubleshooting
procedure.
If no, your print server has a problem that requires assistance from HP Jetdirect
technical support; click on the No button for information on contacting HP.
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/280M/USER/LWTNET05.HTM [5/20/2003 3:56:26 PM]
may provide useful information.
Interpreting the