Using The Caller Id Service To Reject Calls - Canon 4205B002 User Manual

> > Sending/Receiving Faxes Using the Operation Panel of the Machine
Advanced Guide
Faxing
Service to Reject Calls

Using the Caller ID Service to Reject Calls

If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID
does not match the conditions specified in this setting, the machine rejects the phone call or fax
reception from the sender.
Press the Setup button.
1.
Select Device settings, then press the
2.
Use the button to select FAX settings, then press the
3.
Use the button to select Reception settings, then press the
4.
Use the button to select Caller rejection, then press the
5.
Use the button to select Yes, then press the
6.
You can now perform settings for Caller rejection.
Use the button to select the phone call or fax rejection condition, use the
7.
button to select the setting, then press the
Anonymous no.
Selects whether to reject a phone call or fax reception from an anonymous number.
Out of area no.
Selects whether to reject a phone call or fax reception out of the subscribed service area.
Rejected no.
Selects whether to reject a phone call or fax reception from the numbers registered to Rejected
button.
OK
button.
OK
OK
button.
OK
button.
OK
button.
OK
> Using the Caller ID
button.