Scanning In Advanced Mode - Canon 4205B002 User Manual

> >
Advanced Guide Scanning with Other Application Software
Scanning
ScanGear (Scanner Driver)
> Scanning in Advanced Mode

Scanning in Advanced Mode

In Advanced Mode, you can specify the color mode, output resolution, image brightness, color tone, etc.
when scanning.
This section explains how to scan a single document from the Platen.
See "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
documents at one time.
See "Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode
multiple documents placed on the ADF (Auto Document Feeder).
Important
The following types of documents may not be cropped correctly. In that case, click
on the Toolbar to switch to whole image view and scan.
- Photos that have a whitish border
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
The following types of documents cannot be cropped correctly.
- Documents smaller than 1.18 inches (3 cm) square
- Photos that have been cut to various shapes
Place the document on the Platen, then start ScanGear (scanner driver).
1.
Starting ScanGear (Scanner Driver)
Important
Place the document face-down on the Platen and align an upper corner of the document with
the corner at the arrow (alignment mark) of the Platen.
Click Advanced Mode.
2.
The Advanced Mode tab appears.
>
Scanning with Advanced Settings Using
" to scan multiple
" to scan
(Thumbnail)