Scan Tab - Canon 4205B002 User Manual

> >
Advanced Guide Scanning with Other Application Software
Scanning
Tab

Scan Tab

On the Scan tab, you can specify the following settings.
Status of ScanGear dialog after scanning
Select what to do with ScanGear (scanner driver) after scanning images.
Close ScanGear automatically
Select this to return to the original application when scanning is completed.
Do not close ScanGear automatically
Select this to return to the ScanGear screen for another scan when scanning is completed.
Display the dialog to select next action
Select this to open a screen and select what to do when scanning is completed.
Note
Even if Do not close ScanGear automatically or Display the dialog to select next action is set,
some applications may not support it.
>
ScanGear (Scanner Driver) Screens
Page top
> Scan