Step 10: Configure For Tcp/Ip; Assigning A Printer Ip Address - Lexmark 26H0122 - T 430d B/W Laser Printer Setup Manual

Step 10: Configure for TCP/IP

Assigning a printer
IP address
Complete this step only if you are setting up a network printer. If you
are setting up a local printer, continue with Step 12: "Using the
publications CD" on page 47.
If you have TCP/IP available on your network, we recommend that you
assign an IP address to the printer.
If your network is using DHCP, an IP address is automatically assigned
after you connect the network cable to the printer.
1
Look for the address under the "TCP/IP" heading on the
network setup page you printed in "Printing a network
setup page" on page 33.
2
Go to "Verifying the IP settings" on page 36 and begin with
step 2.
If your network is not using DHCP, then you must manually assign an
IP address to the printer.
An easy way to do this is to use the printer operator panel:
1
Press Menu until you see NETWORK MENU, and then press
Select.
2
Press Menu until you see Standard Network, and then press
Select.
3
Press Menu until you see Std Net Setup (or Network 1
Setup or Network 2 Setup), and then press Select.
4
Press Menu until you see TCP/IP, and then press Select.
5
Press Menu until you see Set IP Address, and then press
Select.
6
Change the address by pressing Menu to increase or decrease
each number. Press Select to move to the next segment. Press
Select when you are finished.
Configure for TCP/IP
35