Attaching A Network Cable - Lexmark 26H0122 - T 430d B/W Laser Printer Setup Manual

Attaching a
network cable
Ethernet
Use Category 5 cable with an RJ-45
connector for the standard network port.
• A parallel port requires an IEEE-1284 compliant parallel
cable such as Lexmark part number 1329605 (3 m [10 ft]), or
1427498 (6 m [20 ft]).
You can attach your printer to a network using standard network
cables.
A 10BaseT/100BaseTx Fast Ethernet port is standard on the network
model.
To attach the printer to a network:
1
Make sure the printer is turned off and unplugged.
2
Plug one end of the standard network cable into a LAN drop or
hub and the other end into the Ethernet port on the back of the
printer. The printer automatically adjusts for the network speed.
Attach cables
30