Table of Contents
Advertisement
The clips on either side of the memory module will click
to secure the memory module.
12
Replace the memory module slot cover and screw.
13
Turn the computer over and restart it.
You can now continue setting up the computer. When the
operating system has loaded, you can verify that the
computer has recognized the additional memory module.
If you are adding an extra memory module after setting up the
computer, verify that the computer has recognized it correctly
as described in
Removing a memory module
If you need to remove a memory module:
1
Complete steps
page 54
module slot cover.
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
"Checking total memory" on page
1–6
to shut down the computer and open the memory
Do not try to remove a memory module with the computer
turned on. You can damage the computer and the device.
Do not remove the memory module while the computer
is in Standby mode. The computer could hang up the
next time you turn it on and data in memory will be lost.
In either of the above cases, the Standby configuration
will not be saved.
Getting Started
Adding memory
in
"Installing a memory module" on
57
59.
Advertisement
Table of Contents
