Installation; Before Connecting; Cable Connection - Eizo RadiForce GS220 User Manual

English

2. INSTALLATION

2-1. Before Connecting

Before connecting your monitor to the PC, change the display screen settings resolution
(seep. 36) and frequency in accordance with the charts below.
NOTE
• When your computer and monitor support VESA DDC, the appropriate resolution
and the refresh rate are set just by plugging your display into the computer without
any manual settings.
Resolution
640×480
720×400
1600×1200
1200×1600

2-2. Cable Connection

NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
• Refer to the PC user's manual when connecting the monitor.
• The monitor setting may need to be changed in some environment. If the monitor is
in portrait position and displayed in 8-bit monochrome, no setting is required.
For more information, refer to "2-3. Environmental Settings" (p. 15).
1.
Rotate the monitor ninety degrees counter-clockwise into the portrait
position.
12
2. INSTALLATION
Frequency
VGA 60 Hz
VGA TEXT 70 Hz
VESA 60 Hz
Portrait Display 60 Hz
Dot Clock Display mode
Portrait
√
165 MHz
√
(Max.)
−
√
Landscape
√
√
√
−
"√": Supported