Menu setting
Note
Before changing menu settings, you may wish to print
the current menu settings. See "Confirming current
settings" on the previous page.
Set menu item values (printed out for reference as you
proceed) as follows:
1.
Press LF (or SHIFT and LF together) to step forward
(backward) through the menu items to the required item.
2.
To change the setting for a selected item, press FF/LOAD
(or SHIFT and FF/LOAD together) to step forward
(backward) through the setting values to the required
setting.
3.
Repeat steps 1 and 2 as required to change settings for
other items.
4.
To exit menu setting, press SHIFT and SEL together to
save the new settings and exit menu setting mode.
Note
Switching the printer OFF does not save the new
settings.
Operating instructions > 33