Installing The Processor; Removing The Coin-Cell Battery - Dell Vostro 270 Owner's Manual

Owner's manual
Hide thumbs Also See for Vostro 270:
Table of Contents

Advertisement

8.
Lift the processor to remove it from it's socket and place it in an antistatic packaging.

Installing the Processor

1.
Align the two notches on the processor and insert it into the socket, the processor should slide in and fit into the
socket without any force.
NOTE: The processor is notched at one end with a triangle marking. The same marking is also notched on the
processor socket.
2.
Press down on the release lever to lock it with the retention hook.
3.
Close the processor cover.
4.
Place the heat sink and fan assembly on the processor.
5.
Tighten the captive screws securing the heat sink and fan assembly to the system board.
6.
Connect the heat sink and fan assembly cable to the system board.
7.
Replace the cover.
8.
Follow the procedures in

Removing the Coin-Cell Battery

1.
Follow the procedures in
2.
Remove the cover.
3.
Press the release latch to pop the coin-cell battery from it's socket.
After Working Inside Your Computer .
Before Working Inside Your Computer .
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents