Installing the I/O Panel
1.
Place the I/O panel at it's location on the computer.
2.
Replace the screw to secure the I/O panel to the computer.
3.
Route the cables through the metal clips.
4.
Replace the cover.
5.
Follow the procedures in
Removing the Processor
1.
Follow the procedures in
2.
Remove the cover.
3.
Disconnect the heat sink and fan-assembly cable from the system board.
4.
Loosen the captive screws that secures the heat sink and fan assembly to the system board.
After Working Inside Your Computer .
Before Working Inside Your Computer .
21