Exit; Updating The Bios - Dell Vostro 270 Owner's Manual

CPU Configuration
USB Controller
USB Storage Boot Function
Power Management
Restore AC Power Loss
Wake on Lan from S4/S5
Auto Power On
Post Behaviour
NumLock Key
Keyboard Error Report
Table 7. Boot
Set Boot Priority
Hard Disk Drives
CD/DVD ROM Drives
Table 8. Security
Unlock Setup Status
Admin Password Status
System Password Status
Admin Password

Exit

This section allows you to save, discard, and load default settings before exiting from System Setup.

Updating the BIOS

It is recommended to update your BIOS (system setup), on replacing the system board or if an update is available. For
notebooks, ensure that your computer battery is fully charged and connected to a power outlet
Enable or disable the USB controller.
Enable or disable the option to boot
through a USB device
Specifies how the computer will
behave when AC power is restored
after an AC power loss.
Allows the computer to be remotely
turned on.
Enable or disable the computer to
power on automatically. You can
further specify the date and time the
computer can power ON.
Enable or disable the NumLock State
light during POST.
Enable or disable the Keyboard Error
Report to be displayed during POST.
Specifies the order of different devices in which the
computer will boot through at start up.
Specify which hard drive the computer can boot through.
Specify which CD/DVD (optical drives) the computer can
boot through.
Specifies whether the BIOS can be edited.
Specifies whether an administrator password has been
assigned.
Specifies whether a system password has been assigned.
Allows you to change or delete the administrator
password.
Default: Enabled
Default: Enabled
Default: Power Off
Default: Enabled
Default: Disabled
Default: On
Default: Enabled
33