Changing The Voice For Each Part; Select A Voice - Yamaha Clavinova CVP-601 Reference Manual

Changing the Voice for Each Part

You can change the Voice for each keyboard part, Style channel or Song channel.
1
Press the [C] (or [H]) button to select the VOICE parameter.
2
Press one of the [1] – [8] buttons to select the desired part.
The Voice Selection display appears.
3

Select a Voice.

Press one of the Voice category selection buttons on the panel, then select a Voice by using the [A] – [J]
buttons.
When the display for SONG CH 1- 8 or SONG CH 9-16 is selected, you can switch between the two by pressing the [A] (PART) button.
NOTE
Some Voices (such as Organ Flutes) cannot be selected for Style channels.
NOTE
Only Drum kit Voices and SFX kit Voices can be assigned to the RHY2 channel in the STYLE PART display.
NOTE
NOTE When playing GM Song data, channel 10 can only be used for a Drum kit Voice.
9
4
Press the [EXIT] button to return to the MIXING CONSOLE display.
5
Save your settings.
Refer to the Owner's Manual, chapter 9.
72 CVP-601 Reference Manual
1
2