Selecting The Harmony/Echo Type - Yamaha Clavinova CVP-601 Reference Manual

Selecting the Harmony/Echo type

This function lets you apply harmonies to your right hand performance according to the chords you play with
your left hand, and trigger automatic echo or tremolo even by pressing a single note or two notes.
1
Press the [VOICE EFFECT] button.
2
Turn the Harmony/Echo on by pressing the [I] (HARMONY/ECHO) button.
3
Call up the operation display by pressing the [J] (TYPE SELECT) button.
4
Use the [1] – [3] buttons to select the Harmony/Echo type.
2 The Harmony/Echo types are divided into the following groups, depending on the particular effect applied.
 Harmony Types
When one of the Harmony Types is selected, the Harmony effect is applied to the note played in the right-
hand section of the keyboard according to the type selected above and the chord specified in the chord
section of the keyboard shown below.
Chord section for Style playback
and Harmony effect
Chord section for
Style playback and
Harmony effect
6 CVP-601 Reference Manual
Harmony Types
These types apply the harmony effect to notes played in the right-hand section of
the keyboard according to the chord specified in the left-hand section of the key-
board. (Note that the "1+5" and "Octave" settings are not affected by the chord.)
Multi Assign Type
This type applies a special effect to chords played in the right-hand section of the
keyboard.
Echo Types
These types apply echo effects to notes played in the right-hand section of the
keyboard in time with the currently set tempo.
Split Point
Split Point Split Point
(for Style playback) (for the Voice)
RIGHT 1 and 2
LEFT Voice
Voices
Split Point
RIGHT 1 and 2 Voices
LEFT Voice and chord section
for Harmony effect