Balance; Basic Procedure; Mixing Console – Editing The Volume And Tonal Balance - Yamaha Clavinova CVP-601 Owner's Manual

Mixing Console
– Editing the Volume and Tonal Balance –

Basic Procedure

1
Press the [MIXING CONSOLE] button to call up the MIXING
CONSOLE display.
The volume and other settings for each Part are shown via the slider or knob icons.
1,3
2
Use the [A] – [J] buttons to select a parameter, then use the [1] –
[8] buttons to set the value for each part.
9
The slider or knob shaped parameters can be edited via the [1] – [8]
buttons. For instructions on editing the other parameters, refer to the Reference
Manual on the website.
3
Use the [MIXING CONSOLE] button to select the target parts, and
use the TAB [ ][ ] buttons to call up the desired display, then set
the values on each part/display to create the desired sound.
The operation to set the value is the same as in step 2.
 To select the target parts:
Press the [MIXING CONSOLE] button repeatedly to call up the display for the
following parts in sequence.
• PANEL PART
Use this display when you want to adjust the balance between the entire Song part,
entire Style part, Right 1 part, Right 2 part and Left part.
• STYLE PART
Use this display when you want to adjust the balance between all the parts of the
Style.
• SONG CH 1 – 8 or SONG CH 9 – 16
Use this display when you want to adjust the balance between all the parts of the
Song. Pressing the [A] (PART) button will alternates the display between SONG
CH 1 – 8 and SONG CH 9 – 16.
86 CVP-601 Owner's Manual
The Mixing Console gives you intuitive control over various
sonic aspects of the keyboard parts and Song/Style channels,
including volume balance and the timbre of the sounds. It
lets you adjust the levels and stereo position (pan) of each
Voice to set the optimum balance and stereo image, and lets
you set how the effects are applied.
3
2
NOTE
Although the Mixing Console
function provides several
displays (see next page), the
VOL/VOICE display is called up
when you press the [MIXING
CONSOLE] button at the first time
after turning on the power. From
the next time, pressing the
[MIXING CONSOLE] button will
call up the display which was
called up last time.
NOTE
The Style/Song part components
are the same as those that
appear in the display when you
press the panel [CHANNEL ON/
OFF] button once or twice.