Creating Original Organ Flutes Voices - Yamaha Clavinova CVP-601 Owner's Manual

Creating Original Organ Flutes Voices

The instrument uses advanced digital technology to recreate the legendary sound of
vintage organs. Just as on a traditional organ, you can create your own sound by
increasing and decreasing the levels of the flute footages.
1
Press the [ORGAN FLUTES] button.
The FOOTAGE Page of the Organ Flutes Voice is called up.
2
Use the [1] – [8] buttons to adjust the footage settings.
The footage settings determine the basic sound of the organ flutes.
The [1] buttons control two footages: 16' and 5 1/3'. Pressing the [D] button
switches between these two footages.
If you want, you can select the Organ type, change the Rotary Speaker speed and
adjust the Vibrato setting, by using the [A] – [C] and [F] – [H] buttons.
[A]/[B] ORGAN TYPE
[C] ROTARY SP
SPEED
[F] VIBRATO OFF
[G] VIBRATO ON
[H] VIBRATO
DEPTH
[I] PRESETS
Specifies the type of organ tone generation to
be simulated: Sine or Vintage.
Alternately switches between the slow and
fast rotary speaker speeds when a rotary
speaker effect is selected for the Organ Flutes
(DSP TYPE parameter in the EFFECT/EQ
Page), and the DSP is turned on (page 44).
Alternately turns the vibrato effect for the
Organ Flutes Voice ON or OFF.
Sets the Vibrato depth to one of three levels:
1 (low), 2 (mid), or 3 (high).
Opens the File Selection display of the Organ
Flute Voices for selecting a preset Organ
Flutes Voice.
What is "Footage"?
The term "footage" is a reference
to the sound generation of
traditional pipe organs, in which
the sound is produced by pipes
of different lengths (in feet).
NOTE
About the VOLUME/ATTACK
Page and EFFECT/EQ Page, see
the Reference Manual on the
website.
CVP-601 Owner's Manual
2
45