Yamaha Clavinova CVP-601 Owner's Manual page 76

3
Press the [AUDIO] button to call up the USB
AUDIO PLAYER display.
4
Press the [1] (REC) button to engage the Record Standby status.
5
Start recording by pressing the [3] (PLAY/PAUSE) button, then
start your performance.
When recording begins, the elapsed recording time is shown on the right side of
the Recording display.
6
6
Stop recording by pressing the [2] (STOP) button.
The file name is automatically named, and a message indicating the file name is
displayed.
76 CVP-601 Owner's Manual
NOTE
The USB flash memory of "USB1"
is selected as the recording
destination when multiple USB
flash memory devices are
connected. You can confirm the
contents of "USB1" in the file
selection display called up by
pressing the [H] (FILE SELECT)
button on the USB AUDIO
PLAYER display.
NOTICE
Never attempt to disconnect the
USB flash memory or turn the
power off during playback.
Doing so may corrupt the USB
flash memory data or the
recording data.
NOTE
Even if you make a mistake in your
performance, you cannot
overwrite an existing file. Delete
the recorded file on the File
Selection display, then record your
performance again.