Hunter 25745 Owner's Manual And Installation Manual page 13

8 • Completing Your Installation With or Without a Multi Staked Light Fixture (Cont.)
Steps 8-6 – 8-9
Light Plug
Connector
Detail
Housing
Assembly Screw
Steps 8-10 – 8-11
8-11. Remove the receiver from the light kit.
8-12. Disconnect the light plug connectors between the black wire
Receiver
and the black/white wire.
8-13. Disconnect the light plug connectors between the two white
Light Plug
wires.
Connectors
8-14. Install the dummy terminals (included in the hardware kit) on
the two disconnected wires on the receiver.
Light
8-15. Place the receiver into the alternate switch housing. Making sure
Kit
the mounting holes at the top of the switch housing line up
with the matching slots in the top of the receiver.
8-16. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower
switch housings. Attach the lower switch housing to the upper
switch housing with three #6-32 x 1/2" housing assembly
screws.
Plug
Connector
Detail
13
42419-01 • 11/24/08 • Hunter Fan Company