Table of Contents
Advertisement
Assigning a Ringtone
Caller Photo ID features another function that lets you
identify the incoming caller easily: assigning a Ringtone.
With this function, you can assign different ringtones to the
individual Contact.
1. In the main Caller ID screen, select the desired Contact
2. Select Assign > Ringtone from the menu. The Assign
3. When selected, press the Left Softkey ("Done") to return to
2.4 In-call options
Listed below are all the menu options that might possibly be
available when a call is in progress. Some of these options
are only available when multiple calls are in progress or
during a conference call.
End — Disconnect the call.
Hold — Place the active call on hold.
Unhold — Activate the call on hold.
Swap — Switch between two calls.
Save Contacts — Create a Contact record for the caller.
Conference — Join together all existing calls, if you have
subscribed to this service.
Private — Break one call out of a conference and makes this
call active while the rest of the conference is on hold.
Speakerphone — Increase the volume of the earphone.
Mute — Mute the microphone for the active call. The other
party will not hear anything you say, but you can still hear
the other party.
Unmute — Turn the microphone back on for the active
call.
Smartphone User Manual
in the list.
Ringtone screen will appear. Select the desired Ringtone
from the Select a ringtone list. (If you want to search
other folders, open the menu and use the Change Folder
command.)
the main Caller ID screen. An icon will appear to indicate
that a Ringtone is assigned to the Contact.
43
Advertisement
Table of Contents
