QTek 8020 User Manual page 90

Smartphone User Manual
90
Discoverable — The Bluetooth radio is turned on, and any
other Bluetooth devices within range (about 10 meters) can
detect your device and attempt to beam information to it,
establish a bond, or use a Bluetooth service. In this mode,
other devices can detect your device, whether or not a bond
has been created. However, in order to receive a beam from
another device, you must accept it on your device.
If you no longer want your device to be discoverable, select
Off to turn off the radio; or On to leave the radio on but not
allow detection by other devices.
NOTE: Bluetooth must be set to Discoverable mode if you
want to use it in conjunction with Modem Link. See the next
section, 5.4 Modem Link.
Bonds
A bond is a relationship that you create between your phone
and another Bluetooth device in order to exchange informa-
tion more securely. Creating a bond involves entering the
same personal identification number (PIN) on the two de-
vices you want to bond. Once a bond is created, the devices
recognize the bond and are able to exchange information
without your entering a PIN again.
To create a bond:
1.
2.
3.
4.
Make sure that the two devices are within 10 meters of
each other and that Bluetooth is in discoverable mode on
both devices.
When in the Home screen, select Settings > Bluetooth
> Bluetooth from the Start menu.
Select Bonded Devices from the menu, and then New.
Your device searches for other Bluetooth devices and
displays them in the list.
Select the device you want, then select Add.