QTek 8020 User Manual page 55

Smartphone User Manual
55
Capturing a still image
Select Camera from the Start Menu to go directly to Photo
capture mode. If already in a different capture mode, open
the menu and select Photo from the Capture Mode sub-
menu, or press 1 on the keypad to switch to different capture
submodes.
The current capture size (Resolution) dimensions are shown
near the top of the screen. Press 2 on your keypad to select
the Resolution (640 x 480, 320 x 240, or 160 x 120). Press
the Up button if you want to Zoom In, or the Down button to
Zoom back out. Near the bottom of the screen, the current
Zoom ratio is shown. (The size of the Preview window,
shown in the example below, is fixed at 176 x 144 pixels.)
Besides specifying a capture size, you can also specify the
destination storage media for saved files, rename them after
capturing them, and an output quality (the output format for
image capture is JPEG). The number of images you can
still capture, according to available memory and your current
settings, is always displayed.
To capture the image, press the hardware Camera button on
the right side of the phone, or the Left Softkey ("Capture"),
or the Action button.