Beaming Information - QTek 8020 User Manual

Smartphone User Manual
138
Delete
Removes the contact card from the Contacts list.
Edit
Enables you to modify information in the contact card.

Beaming information

You can use the Bluetooth or infrared port on your phone to
send and receive (beam) contact information between your
phone and another mobile device or a PC that has Bluetooth
or an infrared port and supports vCards and vCal. However,
you cannot beam SIM contacts. See Chapter 5 for more
information about Bluetooth.
To beam a contact:
1.
2.
3.
4.
5.
6.
Select Contacts from the Start menu.
Select the Contact entry you want to beam.
Select Beam Contact from the menu in the Contacts
screen.
Scroll to the device to which you want to beam.
Do one of the following:
• To beam by infrared, make sure that the infrared
ports are unobstructed and within close range of each
other.
• To beam by using Bluetooth, make sure that both
Bluetooth radios are turned on and that Bluetooth is
discoverable on the receiving device.
Press the Left Softkey ("Beam").
Status information will then be displayed, indicating the
name of the device to which the phone is beaming, and
whether the beaming process is pending, finished, or has
failed.