In-Call Options - QTek 8100 User Manual

Smartphone User Manual
43
Select Display Settings from the menu if you want to switch
to either Photo Only assignment or Use Template assign-
ment. If you choose Photo Only, you can specify one of
several positions, and a size. If you choose Use Template,
you can specify the template to be used, and the method for
fitting the photo on the Incoming Call screen.
You can also open the Display Settings screen outside of
the "Assign Photo" process by selecting Options > Dis-
play Settings from the main menu in List View, and you
can preview the behavior of any Photo ID assignment by
selecting Preview.

2.4 In-call options

Listed below are all the menu options that might possibly be
available when a call is in progress. Some of these options
are only available when multiple calls are in progress or
during a conference call.
End — Disconnect the call.
Hold — Place the active call on hold.
Unhold — Activate the call on hold.
Swap — Switch between two calls.
Save Contacts — Create a Contact record for the caller.
Conference — Join together all existing calls, if you have
subscribed to this service.
Private — Break one call out of a conference and makes this
call active while the rest of the conference is on hold.
Speakerphone — Increase the volume of the earphone.
Mute — Mute the microphone for the active call. The other
party will not hear anything you say, but you can still hear
the other party.
Unmute — Turn the microphone back on for the active
call.