Removing The Windows Nt 4.0 Bus-Mastering Eide Driver - Dell Precision 410 User Manual

Dell Precision 410 Mini Tower Systems User's Guide
2-8
To reinstall the bus-mastering EIDE driver for Windows NT 4.0, perform the following
steps:
The Program Diskette Maker is available through the Dell Accessories program
folder. For more information, refer to the online help provided in the Program Dis-
kette Maker.
For instructions, see the next subsection, "Removing the Windows NT 4.0 Bus-
Mastering EIDE Driver."
If you are installing the driver from the bus-mastering EIDE driver diskette, make
sure the diskette is in drive A and the listed directory is a:\.
If the driver is already installed, the following message appears:
The SCSI Adapter selected is already installed.
Click Cancel and remove the older driver (see the next subsection for instruc-
tions) before completing this procedure.
If the driver was installed previously (but is not currently installed), the following
message appears:
"Intel PIIX PCI Bus Master IDE Controller" is already
installed on the system.
Click New to install the new driver.