Dell Precision 410 User Manual page 188

WARNING: Could not
configure Plug and
Play Card Name.
WARNING: Could not
configure PCI
device,
ID=DeviceID.
Failed to configure
Number of Total
Count Plug and Play
ISA devices. Use
your system's con-
figuration utility
to resolve con-
flicts. Press any
key to continue.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.
Dell Precision 410 Mini Tower Systems User's Guide
C-10
FRQWLQXHG
The card(s) mentioned are
not fully configured due
to resource conflicts.
If you have documentation that lists the allow-
able resource values for your Plug and Play or
PCI expansion card, you can use the following
procedure to locate and resolve the resource
conflict.
NOTE: If you do not have documentation list-
ing the allowable resource values, see the
corrective action for these messages on the
following page.
Any Plug and Play or PCI expansion cards
that could not be configured should be
marked config err in the list of cards
in the ICU window.
The System Resource Usage dialog box
displays all resources currently used by
the system.
The Card Resources Usage dialog box
identifies which device is using the
resource.
See "Modifying a Card" in Chapter 4 for
instructions.