Dell Precision 410 User Manual page 122

Dell Precision 410 Mini Tower Systems User's Guide
9-8
256 MB 256 MB
512 MB 256 MB
768 MB 256 MB
1024 MB 256 MB
Follow this procedure to perform a memory upgrade:
Follow the instructions in "Installing a DIMM" or "Removing a DIMM," as appro-
priate, found later in this section.
NOTE: After you remove and replace the cover, the chassis intrusion detector will
cause the following message to be displayed at the next system start-up:
ALERT! Cover was previously removed.
The system detects that the new memory does not match the existing system
configuration information and generates the following message:
The amount of system memory has changed.
Strike the F1 key to continue, F2 to run the setup utility
256 MB
256 MB 256 MB
256 MB 256 MB 256 MB