c. Leave a test message.
d. Go to the phone that you called. Verify that the [Message] indicator is lit.
e. Press the [Message] button on a phone and retrieve the voice-mail message.
If appropriate, repeat the previous steps using devices connected to the Cisco Catalyst
Step 6
Express 520.
12
Modifying the Software Configuration
This section contains the following topics:
Information About the Software Configuration
•
Default Software Configuration
•
System Management Tools
•
•
Localization Support
Configuring Localization
•
Installing Cisco Configuration Assistant
•
Logging Into Cisco Unified CME and Cisco Unity Express GUI
•
Logging Into Cisco Unified CME Phone User Page
•
Information About the Software Configuration
This section contains the following topics:
Default Software Configuration
•
System Management Tools
•
Localization Support
•
Default Software Configuration
The default software configuration on the UC 520 includes these preconfigured parameters:
• Network and device parameters
• Internet connection (DHCP)
• Voice system features
• Firewall and NAT
42