Verifying The Communications - Cisco UC520-24U-8FXO-K9 Overview

For analog lines only: Connect an RJ-11 cable to one of the FXS ports on the front panel of
Step 3
the UC 520. Connect the other end of the cable to an analog telephone service device such as
a keyset or PBX.
Wireless access to the system can be provided as follows:
Step 4
a. (Requires factory-installed wireless option on the UC 520) To deploy a single integrated
wireless access point, connect the antenna to the wireless port on the front panel of the UC
520.
b. To deploy up to three wireless access points in standalone mode, connect each Cisco AP521
to an available PoE port on the front panel of the switch.
c. To deploy advanced wireless options such as the Cisco Mobility Express Solution in
Controller Mode, use the Cisco Configuration Assistant to configure the wireless controller.
Then connect the wireless controller to an available PoE port on the front panel of the switch.
For installation information, see the following URL:
http://www.cisco.com/en/US/products/ps7320/tsd_products_support_series_home.html.
Use Configuration Assistant to perform the following tasks. For more information, see online
Step 5
help.
a. Verify that the Topology View page includes the newly-installed hardware device.
b. Configure the options in the Secure Wireless window in Configuration Assistant as required.
c. Configure and assign user accounts to connected Cisco Unified IP phones in Configuration
Assistant as required.
11

Verifying the Communications

To verify communications, follow these steps"
Test the local phone operation. Make calls between phones that are connected to the UC 520.
Step 1
Test the Internet links by accessing
Step 2
UC 520.
Test the PSTN by placing a call from a Cisco Unified IP phone that is connected to the UC 520
Step 3
to a number in the local calling area.
Test the PSTN by using a cell phone to place a call to a Cisco Unified IP phone.
Step 4
Test the AA and voice mail by using a cell phone to place a call to an unattended
Step 5
Cisco Unified IP phone.
a. Listen for the AA greeting.
b. Press the extension number for the target phone and listen for the voice-mail greeting.
http://www.cisco.com from a PC that is connected to the
41