Lenovo ThinkServer RD240 Hardware Maintenance Manual page 76

6. Connect the mini SAS signal cables to the RAID controller and the backplane by doing the following:
Note: Use the two 440 mm (17.32 inches) mini SAS signal cables.
Figure 38. Connecting the mini SAS signal cable
1
Port 0-3
2
Port 4-7
a. For one mini SAS signal cable, connect one end to the ports 0-3 on the RAID controller. Then,
connect the other end to the mini SAS signal connector
b. For the other mini SAS signal cable, connect one end to the ports 4-7 on the RAID controller. Then,
connect the other end to the mini SAS signal connector
Figure 39. Mini SAS signal connectors on the backplane
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 90.
• To reduce fan noise, the user can manually change the fan speed mode when using a ThinkServer
8708ELP SAS RAID Adapter without a ThinkServer 8708ELP SAS RAID Adapter Battery attached. For
64
ThinkServer RD240 Hardware Maintenance Manual
2 on the backplane.
1 on the backplane.