Kyocera KM-6330 Operation Manual page 84

2. Windows KX Driver
2-6 Output Tab
I Output to:
Specifies the location of ejection of printed copies.
Selection is possible when the optional output devices are installed.
[Printer Default] ................................... Copies will be ejected into the location that is selected in the "Stack select" setting of the printer as
[Side Tray (xxxx)] ................................ Copies will be ejected onto the Side tray.
[Tray A (xxxx)] ...................................... Copies will be ejected into the lower tray of the optional Multi Finisher.
[Tray B (xxxx)] ..................................... Copies will be ejected into the upper tray of the optional Multi Finisher.
[Tray 1,2,3,4,5 (xxxx)] ........................... Copies will be ejected into the 1,2,3,4,5 tray of the optional Multi Tray.
[Folding Tray] ....................................... Copies will be ejected into the optional Folding unit.
[xxxx (Face-down)] ............................. Copies will be ejected face down into the xxxx optional devices.
[xxxx (Face-up)] ................................... Copies will be ejected face up into the xxxx optional devices.
* If you designate a setting other than [Side Tray] as the location of ejection, it is necessary to first perform the setting for that optional
equipment under "Device Options" on page 2-16.
I Copies
Specifies the number of prints to be made. Select between 1 and 999 copies by clicking on the arrows at the right of the field or by typing
the desired number directly into the field. The factory default setting is "1".
I Collate
When you are printing more than one copy of one or more pages, it is possible to sort the printed copy sets.
* If you select to turn on the "Staple" setting (see page 2-10), it is necessary to select "Collate" here.
Example: If the "Collate" option is selected, it is possible to print out 2 sets of the same copies.
the place where the printed paper will be ejected.
2-9