Table of Contents
Advertisement
Removing the front bezel
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as compact discs or USB flash drives, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to
the internal components of the computer.
5.
Remove the computer access panel. See
6.
Lift up the three tabs on the side of the bezel (1), and then rotate the bezel off the chassis (2).
Regardless of the power-on state, voltage is always present on the system board as long as
Removing the computer access panel on page
7.
Removing the front bezel
9
Advertisement
Table of Contents
