3.2
[Basic]
3.2.2
[Paper]
Select the paper type and size to be printed or change the paper size and paper type settings configured for
each paper tray.
0
The auto zoom setting and the auto paper setting cannot both be selected at the same time.
0
Be sure to specify the paper type when special paper is loaded into a paper tray.
0
If the paper size or type is not correctly specified, a paper jam may occur or image quality may deteri-
orate.
%
Press [Basic] ö [Paper].
Settings
[Auto]
Trays [1] - [4]
[L] (Optional LCT)
# (Bypass Tray)
[Change Settings]
bizhub 652/552
The paper size is automatically selected according to the original size.
Select the corresponding try button to manually select the desired paper.
Press this button to specify the paper type and size for the selected paper
tray.
[Paper Type]
Specify the paper type for the selected paper
tray. There are limits on the types of paper that
can be loaded in a paper tray.
•
•
A paper tray with the [Single Side Only] setting
selected is given priority when the single-side
printing is specified.
[Duplex 2nd Side] (only for Bypass Tray): Se-
lect this setting in combination with the paper
type to print on paper with data printed on one
side.
3
3-6