Proof Copy - Konica Minolta bizhub 552 User Manual

2.1 Control Panel and functions
2.1.9

Proof Copy

Pressing the Proof Copy key allows you to print a single proof copy and check it before printing a large
number of copies. This prevents copy errors from occurring.
0 This proof copy function is available only when you specify multiple sets of copies.
1
Load the original.
2
Press the Proof Copy key.
The original is scanned and a single proof copy is printed.
% If the original is placed on the Original Glass, pressing [Finish] ö the Start key outputs one copy.
3
Check the proof copy.
% To change the copy settings, press either the C key or the Reset key, and configure the settings
again.
% To print the remaining number of copies, press [Print].
% If the system reset or auto reset function starts operating while proofing a copy, the job being
proofed is registered as a stored job. For details on printing a stored job, refer to [User's Guide Copy
Operations].
bizhub 652/552
2
2-12