Asus M2A VM - Motherboard - Micro ATX User Manual page 42

9.. Serial.port.connectors.(10-1.pin.COM1)
The connector is for a serial (COM) port. Connect the serial port module
cable to the connector, then install the module to a slot opening at the back of
the system chassis.
The serial port bracket (COM1) is purchased separately.
M2A-VM
M2A-VM.COM.port.connector
10. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either High Definition Audio or AC`97 audio standard. Connect one
end of the front panel audio I/O module cable to this connector.
M2A-VM
M2A-VM Analog front panel connector
•
•
1-30
®
®
We recommend that you connect a high-definition front panel audio module
to this connector to avail of the motherboard high-definition audio capability.
If you want to connect a high-definition front panel audio module to this
connector, make sure that the Front.Panel.Type item in the BIOS is set to
[HD Audio]; if you want to connect an
this connector, set the item to [AC97]. See page 2-25 for details.
COM1
PIN 1
High-definition
pin definition
Legacy AC'97-compliant
AAFP
AC`97
front panel audio module to
Chapter 1: Product introduction
pin definition