Asus M2A VM - Motherboard - Micro ATX User Manual page 41

7. USB connectors (10-1 pin USB56, USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
M2A-VM
®
M2A-VM.USB.2.0.connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
8. Optical drive audio in connector (4-pin CD)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
M2A-VM
®
M2A-VM Internal audio connector
To activate ASUS Music Alarm:
• Connect the analog audio cable from the optical drive to the 4-pin CD-IN
connector labeled CD on the motherboard.
• Connect speakers or a headphone to the Line-Out (lime-colored) port on
the front or rear panel for audio output. You may also connect speakers or a
headphone to the output jack on the optical drive.
ASUS M2A-VM
USB56 USB78
PIN1
PIN1
CD
(black)
USB910
PIN1
1-29