Synchronizing Via Bluetooth - HTC Touch Pro2 T-Mobile User Manual

10 Synchronizing Information
Troubleshooting sync connection problem
In some cases, when the computer connects to the Internet or a local network, it
may disconnect the connection with your phone in favor of the Internet or network
connection.
If this happens, tap Start > Settings > All Settings > Connections > USB to PC,
and then clear the Enable faster data synchronization check box. This makes your
computer utilize a serial USB connection with your phone.

5.5 Synchronizing via Bluetooth

You can connect and synchronize your phone with the computer using Bluetooth.
Note
To connect and synchronize your phone with a computer via Bluetooth, your
computer must have a built-in Bluetooth or installed with a Bluetooth adapter or
dongle.
To synchronize with a computer via Bluetooth
1. Set up Windows Mobile Device Center or ActiveSync on your computer to
synchronize through Bluetooth. See the program's Help for instructions.
2.
Make sure that Bluetooth on both your phone and the computer are turned
on and set to visible mode. See "Bluetooth Modes" in Chapter 9 for details.
If this is the first time you have connected to this computer via Bluetooth,
you must first set up a Bluetooth partnership between your phone and the
computer. For more information about creating a Bluetooth partnership, see
"Bluetooth Partnerships" in Chapter 9.
3. On your phone, tap Start > ActiveSync.
4. Tap Menu > Connect via Bluetooth.
Note
To conserve battery power, turn off Bluetooth when not in use.