Setting The Paper Type - Lexmark 20T3650 - T 620n B/W Laser Printer User Manual

Setting the Paper Type

Once the drawer is installed, you should set the paper type. To set the paper type,
go to the printer operator panel, and then follow these steps:
1
Make sure the printer power is on and the Ready status message appears
on the display.
2
Press
Menu
3
Continue to press and release
display.
4
Press
Select
5
Continue to press and release
display.
6
Press
Select
menu.
7
Continue to press and release
the tray number of the 2000-sheet drawer) appears on the display.
8
Press
Select
9
Continue to press and release
the 2000-sheet drawer appears on the display.
10
Press Select to select the paper type.
11
Press to display the Ready status message.
Go
to access the menus.
to access the Paper Menu.
to show the list of available menu items for the Paper Type
to show the list of available menu items for Tray x Type.
Note: You may select any operator panel feature available
except Paper Type = Transparency.
until Paper Menu appears on the
Menu
until Paper Type appears on the
Menu
until Tray x Type (where x represents
Menu
until the paper type you are using in
Menu
2000-Sheet Drawer User's Guide
11