Installing The 2000-Sheet Drawer - Lexmark 20T3650 - T 620n B/W Laser Printer User Manual

Installing the 2000-Sheet Drawer

Decide on an installation location for the 2000-sheet drawer. The printer, and
possibly other options, will be placed on top of the drawer, so allow a maximum of
137.16 cm (4 ½ ft) for clearance.
Note: Your drawer is pre-configured to either letter or A4 paper size.
1
Turn the printer power off and unplug the power cord.
2
Disconnect any other cables attached to the printer.
3
Place any options you may have on top of the drawer one at a time. Refer
to your printer documentation for proper installation instructions.
4
Ask someone to help you lift the printer and position it above the drawer
and any options you may have installed in step 3.
CAUTION!
6
2000-Sheet Drawer User's Guide
To use a different paper size, see page 12 before placing any
options or the printer on the 2000-sheet drawer.
Make sure your fingers are not under the printer when you set it
down. Use the handholds on the printer or ask someone to help
you lift it.