Hunter 23781 Owner's Manual And Installation Manual page 13

7 • Completing Your Installation With or Without a Light Fixture (continued)
Note: If you do not want to install the light fixture, see
"Uninstalling the Light Fixture" on page 12.
7-5. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-6. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three #6-32 x 3/8" housing assembly screws. You will
need to rotate the blade irons out of the way for each screw.
Installing the Shades and Bulbs
7-7. Remove the plastic from each of the shades.
7-8. Install the shades.
7-9. Install three B10 candelabra bulbs light bulbs (40 Watt maximum
each).
Light Bulb
Shade
Steps 7-8 – 7-9
13
42609-01 • 01/12/11 • Hunter Fan Company
Plug
Connector
Step 7-5
Plug
Connector
Detail
Step 7-6
Lower
Switch
Housing
Housing
Assembly
Screw