Table of Contents
Advertisement
The wireless section is used to configure the wireless settings for your Access Point. Note that changes
made in this section may also need to be duplicated on wireless clients that you want to connect to your
wireless network.
To protect your privacy, use the wireless security mode to configure the wireless security features.
The Wireless tab provides the following configuration options: Basic, Advanced, MAC Filter, Security,
WPS and Station List.
Wireless Basic - Access Point
Repeater Mode Support
Repeater Mode Support allows you to "repeat" a wireless signal from an existing access point.
Select the radio button to enable or disable "Repeater Mode Support". When enabled you have the
option of defining the specific access point to repeat off of by entering in the remote access points or
wireless router's wireless MAC address into the "Repeater MAC Addr. (Optional)" field. You must also
configure the TEW-638AP with the same SSID, channel and wireless encryption settings of the remote
access point.
Page 27
Advertisement
Table of Contents
