Table of Contents
Advertisement
Channel Bandwidth
The "20/40" MHz option is usually best. The other option is available for special circumstances.
Guard Interval
Using "Auto" option can increase throughput. However, it can also increase error rate in some
installations, due to increased sensitivity to radio-frequency reflections. Select the option that works best
for your installation.
Wireless Advanced
Beacon Interval
Beacons are packets sent by a wireless Access Point to synchronize wireless devices. Specify a Beacon
Period value between 20 and 1000. The default value is set to 100 milliseconds.
Fragment Threshold
This setting should remain at its default value of 2346. Setting the Fragmentation value too low may
result in poor performance.
Page 31
Advertisement
Table of Contents
