2. Hardware Installation Note: 1. Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. 2. Disable any anti-virus and firewall programs before starting hardware installation. For Windows Users 1.
Page 5
7. Connect the Power Adapter to the Access Point and then to a power outlet. Then click Next. 8. Select the TEW-638APB from the list and then click Configure. 9. Enter a password and then click Login. The default password is admin.
Page 6
10. Select Access Point and then click Next. Note: For AP Client setup, please refer to the User's Guide for step by step instructions. The User's Guide can be found on this product's CD-ROM. 11. Select Dynamic IP Address Configuration and then click Configure.
Page 7
14. Select the desired Wireless Mode and then click Next. 15. Select a Security Mode and then click Next. Note: 1. To protect your network from any unauthorized access it is recommended to enable wireless encryption. 2. The example below is for WPA2-PSK (AES) security. If you select WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2.
Page 8
17. Click Save (optional). This saves your configuration settings in a file, which can be roloaded when needed. 18. Give the file a name, then click Save. 19. Click Configure to apply the settings. 20. Click Exit.
21. Click Yes to exit. 22. Connect the 2dBi detachable antennas to the TEW-638APB. Note: To connect a wireless computer to the TEW-638APB, please refer to the first question in the troubleshooting section. Your Installation is complete For detailed information regarding the TEW-638APB’s configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com.
Page 10
Product Name: N300 Wireless Access Point Trade Name: TRENDnet TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility. EMC: ETSI EN 301 489-17 V2.2.1 2012-09 ETSI EN 301 489-1 V1.9.2 2011-09...
Page 11
Product Warranty Registration If you have any questions regarding the product Please take a moment to register your installation, please contact our Technical Support. product online. Go to TRENDnet’s website at: Toll free US/Canada: 1-866-845-3673 www.trendnet.com/register Regional phone numbers available at www.trendnet.com/support...