Table of Contents
Advertisement
6. Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router's
DHCP server.
Note: Please make sure that the Broadband router's DHCP server is the only DHCP server available on your LAN.
Once you've configured your PC to obtain an IP address automatically, please proceed to Step 3.
2d) Windows NT
1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.
2. Double-click Network icon. The Network window will appear. Select the Protocol tab from the Network window.
3. Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not installed, click the Add button to
install it now. If TCP/IP is installed, go to step 5.
4. In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok button to start installing the
TCP/IP protocol. You may need your Windows CD to complete the installation.
5. After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of Network Protocols and then
click the Properties button.
Check each of the tabs and verify the following settings:
IP Address: Select Obtain an IP address from a DHCP server.
DNS: Let all fields are blank.
WINS: Let all fields are blank.
Routing: Let all fields are blank.
6. Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router's
DHCP server.
Note: Please make sure that the Broadband router's DHCP server is the only DHCP server available on your LAN.
Once you've configured your PC to obtain an IP address automatically, please proceed to Step 3.
7
Advertisement
Table of Contents
