Telstra Big Pond - Edimax Broadband Router User Manual

Idle Time Out
Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for
the L2TP connection. You can start using the router now, if you wish to use some of the advance features supported by
this router see chapter 2, 3, 4.

1.6 Telstra Big Pond

Select Telstra Big Pond if your ISP requires the Telstra Big Pond protocol to connect you to the Internet. Your ISP should
provide all the information required in this section. Telstra Big Pond protocol is used by the ISP in Australia.
Parameter
User Name
Password
User decide login server
manually
Login Server
Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for
the Telstra Big Pond connection. You can start using the router now, if you wish to use some of the advance features
supported by this router see chapter 2, 3, 4.
The WAN "idle timeout" auto-disconnect function may not work due to abnormal
activities of some network application software, computer virus or hacker attacks from
the Internet. For example, some software sends network packets to the Internet in the
background, even when you are not using the Internet. This function also may not work
with some ISP. So please make sure this function can work properly when you use this
function in the first time, especially your ISP charge you by time used. Due to the many
uncontrollable issues, we do not guarantee the WAN "idle timeout" auto-disconnect
function will always work. In order to prevent from extra fee charged by ISP, please
TURN OFF THE ROUTER WHEN YOU FINISHED USING THE INTERNET.
Enter the User Name provided by your ISP for the Telstra Big Pond connection
Enter the Password provided by your ISP for the Telstra Big Pond connection
Select if you want to assign the IP of Telstra Big Pond's login
Server manually.
The IP of the Login Server.
Description
15