Understanding Basic Wireless Security Options - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual
802.11g wireless access point
Hide thumbs
Also See for WG302 - 802.11g ProSafe Wireless Access Point:
- Reference manual (128 pages) ,
- Configuration (3 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Reference Manual for the WG302 802.11g ProSafe Wireless Access Point
•
Data Rate. Shows the available transmit data rate of the wireless network. 108 Mbps is only
available when the operating mode is 802.11g only and the channel is 6. The default is Best.
•
Output Power. Set the transmit signal strength of the access point. The options are full, half,
quarter, eighth, and min. Decrease the transmit power if more than one AP is co-located using
the same channel frequency. The default is Full.
Understanding Basic Wireless Security Options
The table below identifies the various basic wireless security options. A full explanation of these
standards is available in
Figure 3-5: Wireless Security Settings
3-11
Appendix B, "Wireless Networking
December 2003
Basics".
Basic Installation and Configuration
Advertisement
Table of Contents
